70K GPD Standard System
The nominal capacity of each unit is 70,000 gallons per day (gpd) without supplemental process tankage. The BluBox treatment capacity can be easily supplemented by adding process tankage for higher strength waste applications. With remote monitoring and reporting tools, operators can view their system and generate real-time performance reports.
150K GPD / 300K GPD Standard Designs
The modularity of BluBox MBR units allows one to set up multiple trains with the base 150k and 300k designs to address higher hydraulic loads. In addition, one is able to phase in additional BluBox units over time as needed. All offboard equipment and unit operations are available as options for each project. From lift stations to equalization, generators, and waste solids management equipment, all plant assets are controlled by the onboard computer.
Membrane: Robust, simple and efficient membrane cassettes
The reinforcing bars at the top seam and shock-absorbing rings make the L-2 Module three times more durable than older products. It is “the most durable BIO-CEL module ever made.” Low flux design ensures reliable operation and the fine bubble diffuser requires no routine maintenance.
High Effluent Quality
The BIO-CEL® membrane is a cost-effective and scalable solution for meeting challenging effluent requirements for wastewater treatment. The BIO-CEL MBR membrane serves as an effective physical barrier for the retention of solids and bacteria. It produces a high volume of superior quality effluent at a consistent flow rate and is especially useful for water reuse applications (California Title-22 approved).
Less Cleaning Time
The open-side design of the flat-sheet L-2 BIO-CEL® Membrane Modules simplifies maintenance as compared to competing technologies. The patented BIO-CEL MBR membrane laminate combines the advantages of flat sheet and hollow fiber membranes, allowing for backwash capability and increased durability.
Remote Monitoring: Robust, Simple Controls
Powerful, easy data monitoring
The Streametric data monitoring tool makes data management easy. Information is readily available from a smartphone using a secure connection and assignable privileges. The platform includes report generation tools, predictive analytics, and customizable dashboard. Each operator can setup his or her own landing page to see prioritize information based on preference.
Intelligent Remote Monitoring
Minimal On-Site Construction
The wastewater system is a self-contained, fully transportable, integrated assembly of equipment constructed for the purpose of treating wastewater. It is a biological process that utilizes submerged ultrafiltration (UF) membrane modules for the purposes of solids liquid separation. Bio-Win™ modelling and design calculations are provided to meet multi-jurisdictional regulatory environments.
A secondary fine screen is provided with each BluBox MBR unit for screen redundancy and re-screening for solid separation. The BluBox MBR unit dimensions are 45’ x 12’ x 8.5’ and are divided into four distinct zones. There is an Anoxic Zone, a Pre-Aeration (PA) Zone and two Membrane (MB) Zones. All required process treatment equipment including motor control panel, pumps, blowers and instrumentation are located on upper and lower process equipment porches. An optional UV disinfection can be placed on the lower porch. There are up to nine connections to the system including influent, rescreening, effluent, electrical, plant water, and four drains/WAS connections. Chemical feed systems are piped to off-board chemical drums.
STANDARD UNIT TREATMENT CAPACITY
ACHIEVABLE EFFLUENT QUALITY
- BOD5 < 5 MG/L, TSS < 5 MG/L, TN < 10 MG/L, TP < 0.5 MG/L
- WITHOUT SUPP. PROCESS TANKBOD5 < 5 MG/L, TSS < 5 MG/L, TN < 3 MG/L, TP < 0.15 MG/L
- WITH SUPP. PROCESS TANK
MICRODYN NADIR BIO-CEL L-2
|AREA PER MODULE||5,166 ft2|
|DESIGN FLUX||6.8 gfd|
|AIR SCOUR RATE||53 scfm|
DIMENSIONS AND WEIGHT
|L x H x W||45ft x 12ft x 8.5ft|
|DRY WEIGHT||50,000 lbs|
|OPERATING (WET) WEIGHT||250,000 lbs|
|250 Amp service (provided by others).|
|All electrical loads including convenience outlets, instruments, motors, automated valves are pre-wired. Only one field connection is required.|